• Maximize Your Solar Panel Efficiency with MBB Solar Cell Welding Stringer - Industry-Leading Technology for Precise and Efficient Soldering

Maximize Your Solar Panel Efficiency with MBB Solar Cell Welding Stringer - Industry-Leading Technology for Precise and Efficient Soldering

MBB Solar Cell Welding Stringer is a fully automatic machine used to non-destructively cut the mono-Si or poly-Si cells and then solder them into a string.

WhatsApp :

Inquiry Now!

Maximize Your Solar Panel Efficiency with MBB Solar Cell Welding Stringer - Industry-Leading Technology for Precise and Efficient Soldering

Main Function

MBB solar cell welding stringer is a fully automatic machine used to non-destructively cut the mono-Si or poly-Si cells and then solder them into a string. Normally it can work with 156-230mm (3BB-20BB) cells. The cell cut module can cut cells in half, or cut cells into three strips after upgrade. The soldering module can be upgraded for 156-230mm (full, half-cut, 1/3-cut) cells. With the use of PLC, servo, SCARA robot, industrial image processor system and other advanced automation technology, the entire process from cell feed to string outlet is fully automated.

Main Technical Parameters


 

Item

Specifications

 

Description

Traditional Cells

MBB Cells

 














Basic Information

 

 

 

Uptime

 

 

 

≥95%

(1 - unscheduled downtime/24H), unscheduled downtime refers to   the time when the equipment   malfunctions   or is shut down unexpectedly.

 

 

 

 

 

 

Speed

18Xmm cells: 3BB-12BB   Half-cut≥6800 strips/hour

18Xmm cells: 13BB-20BB

Half-cut≥6000 strips/hour

 

230mm cells: 3BB-12BB

Half-cut,   1/3-cut  ≥6800 strips/hour   230mm cells: 13BB-20BB

Half-cut, 1/3-cut    ≥6000strips/hour

 

 

 

The speed depends on the solder   process. If the required   solder time is too long, it may affect the production speed.

 

 

 

Cell Cracks

 

161mm to 171mm cells:   Mono-Si ≤0.2%;

171mm to 230mm cells:   Mono-Si ≤0.25%;

Popular Grade A cell,   thickness

≥17m

Cell crack ratio = (cracked cells + micro-cracked cells)/total number   of soldered cells × 100%

Average Laser Power

50W/300W

Laser for grooving/laser for heating

Servic Life/Warranty of Laser

 

Warranty:   20,000 hours


Defect Detection

CCD


 

Overall Positioning Accuracy

Positioning deviation: ≤±0.05mm   Angular deviation: ≤±0.04°   Cutting accuracy: ≤±0.1mm


 

Groove Length

 

<1.5mm


 

Groove Depth

 

0-65% (adjustable)


 

Flux Coating Method

 

Soak of ribbon


 

Soldering Method

 

IR soldering


 

 

Temp Control Accuracy

 

±7.5

The upper/lower temp limits can be set on HMI; an alarm will be raised  when the temp is out of  the limit.


Detail picture

 Solar Cell Welding StringerSolar Cell Tabber Stringer

About US

Ooitech, One-stop solution for solar module making machine. Has the following required machinery and accessories 

 Solar Panel Manufacturing Equipment

Ooitech “Turnkey Solution” Includes: Factory Construction, Facility Layout, Raw Materials BOM guidance, Production Procedure assistance, Solar Power Station installation technical support Etc. 

Ooitech focus on:

Supply 10MW-500MW Solar Module Making Machine

Update the traditional PV line to newest MBB solar panel production line.

Main machinery

Solar Cell Tabber Stringer Machine

Automatic Solder Bussing Machine

Automatic Laminator

High Speed Automatic Layup Station

Automatic Framing Machine

Electroluminescence Test

Solar Simulator Or IV Tester

Solar Cell Laser Cutting Machine

Solar Ribbon Cutting Machine

Views: 1817 Update: 2024-03-22
New Solar Cell cutting machine

Contact Us


Choose Your Planed Business, and this is required, so you have to pick one.

Our Location

Building 1, Zixin Industrial Park, Yangguang Ave,Jiangxia Economic Development Zone, Wuhan of China

Send Message

: info ooitech.com

Working Hours

Mon-Fri: 8.30AM-5.30PM (UTC+8)

After Service

(+86) 185-7164-6990(Whatsup)


WhatsaApp Message